Seams to Fit Part 3: More Power to Interlining! (Technicos)

Using  stitching marks on my interlining pieces to define the stitching lines on the fashion fabric it's backing.              

Previously

Seams To Fit Part 1: A Little Less Laxity 

Seams To Fit Part 2: Making My Mark 

I figured out how to take advantage of my interlining, to help match the seams on my bustier project.

What is interlining?
Interlining is like a piece of backing for a garment's fashion fabric. In this bustier project, my fashion fabric is denim. My interlining is a piece of plaid 100% cotton flannel. You will never see the interlining once the garment is done, even on the inside. That's because this garment will have a second shell that includes lining. The interlining will be sandwiched in between the lining and the garment fabric.

I cut the interlining just like I cut the fashion fabric.

The interlining is just sewn on underneath the piece it backs.  I treat the two pieces of material as though they are just one piece of fabric. The back/wrong side of the interlining is sewn to the back of the fashion fabric.

Why did I used interlining in this garment?
Typically interlining is used to make a fashion fabric more stable and give a little less. For example you might use interlining with linen to make it crisper. (In which case you might cut the interlining just a little more narrow - a good trick, eh?)

In this case, I used interlining as a layer of extra protection because of the bones/stays that are in the next layer below it. It helps avoid the chance that these bones will slip out and poke into the outer/fashion fabric layer.

How I took advantage of my interlining, to help match the seams on my bustier project.

Because this bustier has really small pieces, and is really fitted, I marked, then sewed through, the stitching lines all the way around on my interlining pieces. I just sewed through that one layer, to make the seam/stitching lines really clear. 

I also marked all the stitching lines on the inside of my fashion fabric. I could have basted those lines, then matched up the stitched lines to ensure that my seams are precise.

But I really don't like having to take all those basting threads out of the fashion fabric. Also, sometimes they're hard to remove, especially if I sew over them.

Since I have the stitched lines on the interlining and the marked lines on the fashion fabric, I was able to slip pins through from the interlining into the marked line and pin the interlining layer to the fashion fabric layer all the way around the piece. I could easily check on the fashion fabric layer to see that the stitched line above was marrying up right with the marks all the way around.

I repeated this process with the adjoining piece - both on the fashion fabric and the interlining fabric - then joined the seams of the two pieces together, slipping the pins from one seam line marking into the one below. I was able to constantly check my pinned stitching lines, to make sure that the seam line below was matching up properly with the seam line on the top.

Figuring out how to sew narrow garment pieces together precisely, and save time removing basting stitches later on, is the kind of technique that keeps me....

Enchanted by Sewing.

~ ~ ~

Web Resources

Boning Up On Bustiers: http://meencantacoser.blogspot.com/2014/03/ench-by-sew-018-boning-up-on-bustiers.html

My Pinterest  Bustiers Board 

Technicos Threadin' The Needle (Hand Sewing)

Bet you already knew that Thread the Needle is an old children's game, and also a dance step patterned after the game. I always get a kick from learning more about common events in daily life, by reading about old recreational pastimes. 

Though, in historical times, working with a sewing needle was probably about as typical an activity as other domestic tasks, I've never heard of a game called Wash the Dishes (though let me know if you've heard of one!). I'm guessing that's because dish washing is a more straightforward process. Hand needle threading has always been just ever so slightly challenging. And of course you often come up against it when you least want to deal with that finicky little task. These days we can typically change into another shirt if we rip a seam heading out the door, but only a generation or two ago, that might not have been an option. It was your day clothes or your Sabbath garment. So you quickly threaded a needle and ran up the seam. And it was just as important as it is today,  to get that thread into that needle eye quick-like-a-bunny.

As I've already mentioned in my post about threading a sewing machine needle, a little spit goes a long way. Yes, I lick the end of the thread (and I do wash my hands before I sit down to do this), but I also spread a little, well I just have to say it again - spit - over the eyehole of the needle. Just as in the case of the machine needle, the water molecules want to buddy up, and the thread is more likely to be attracted to the eye of the needle.

My other favorite needle-to-thread technicos include... beeswax. You can buy beeswax in the notions department, but I keep the stumps from the beeswax candles I buy from the farmer's market and use those. (I like to support those businesses because, and I know you know this too,  local honey promotes good diverse hive health, which is one of those save-the-planet kinda things. Agricultural mono-culture is a big concern for the future of my favorite fruits and vegetables.) Beeswax stabilizes the thread and makes it easier to push through the needle - less fibers on the end of the thread to push against that tiny needle eye.

Also I always make sure to cut the end of my thread at an angle. That makes a point that slips through more easily. I learned this from the same Viking Sewing Machine dealer who taught me the spit trick!

These are the tips that keep me in stitches. 

About.com has needle threading tips, including - but not limited to - those I use
http://sewing.about.com/od/beginner1/tp/needlethreading.htm

Definition
http://www.merriam-webster.com/dictionary/thread-needle

Dance Description and cool wood cut illustration from Webfeet
http://www.webfeet.org/eceilidh/dances/thread-the-needle.html

Technicos: Threadin' the Needle (Machine Sewing)

A little spit, safely applied in more than one spot,
Makes sewing machine threading a little quicker

Have you ever heard this tip I picked up once from a Viking dealer? You lick the thread, of course, but you also put a little, (how can I put this delicately?) - ok - spit- onto the eye of the needle as well. The water molecules are attracted to each other.  

Cutting the end of the thread at an angle, also helps make the tip go through better. It is less likely to split and separate into a bunch of ends.

Safety Tip! Make sure you take your foot off the foot pedal when you slide your wet fingers near that end of that needle! You don't want to make a mistake and start the needle going when you're in the middle of a delicate operation like this. We've all heard stories of sewists who made this awful mistake.

If you've got eyes like Daniel Boone, then no spit required!

Sewing Machine Needle Sizing description at about.com - http://sewing.about.com/od/sewingmachineindex/ig/Sewing-Machine-Needles/Needle-Sizes.--94.htm